Page 1 of 1
MAC address filtering and WAG54G V2
Posted: Fri Jun 16, 2006 6:43 am
by zillah
I have got WAG54G V2 Firmware 1.01.15, when I enabled MAC filtering, for wireless card for the laptop it did not work (I can not access the internet)!!!
See the attachment
Code: Select all
http://img225.imageshack.us/img225/968/macfilterwag54g8gc.jpg
When I disabled MAC filtering I can access the internet.
I am pretty the MAC address for the wireless card has been typed in correctly within the MAC list table.
Posted: Mon Jun 19, 2006 9:24 am
by david
I have not heard of a similar bug before.
Sometimes a device may have multiple MAC addresses. To make sure I enter a MAC correctly I usually follow this procedure:
1. Select Allow all and connect with your device (laptop)
2. View list of connected MAC addresses
3. Copy an paste into restricted MAC address filter list
4. Select Restrict Access / Permit only
good luck
Posted: Mon Jun 19, 2006 11:27 am
by zillah
I borrowed another Laptop from my friend (same as mine Latitude D600) , Please look at this :
Code: Select all
http://img232.imageshack.us/img232/5580/aiowirelesswag54g3kv.jpg
I clicked twice (not only one) on "Save Settings" button
Posted: Mon Jun 19, 2006 11:45 am
by david
Looks correct!
Did you reboot your WAG? If it still doesn't work you may have a faulty WAG/bios.
Posted: Mon Jun 19, 2006 1:35 pm
by zillah
Did you reboot your WAG? If it still doesn't work you may have a faulty WAG/bios.
I did reboot, and i did upgrade firmware as well.
